Ditch the Screw: Why a Lever Quick Release Plate Transforms Your Ball Head

The Screw Plate Struggle: Why It’s Holding You Back

Picture this: You’re hiking to that epic sunset spot, tripod in tow, only to fumble with a tiny screw knob for agonizing minutes while golden hour slips away. Sound familiar? That’s the silent killer of outdoor photography: the stock screw plate on your ball head.

How much better could your shots be if setup took seconds, not minutes?

Enter the lever quick release: My next shoot? Locked and loaded in under 5 seconds, nailing crisp wildlife and landscape frames I’d only dreamed of.

You’re not stuck with that plate

I recently picked up two plates to replace the existing screw type Arca plates on two of my ball heads. Why replace them? To make the process of adding and removing my camera from the tripod faster. I’ve lost precious moments of opportunities because I was battling the screw on the plates. My old plates were like the unreliable friend who shows up late to every party. I’ve never liked the plate screw on ball heads because of the lack of speed they offer, and come winter, the cold temperatures make it even tougher, slower, and sometimes painful to turn the plate screw. RRS (Really Right Stuff) ball heads come with a quick-release lever lock, but if you don’t own a RRS ball head, you can add the convenience and ease of a quick-release lever lock to most any ball head, at minimal cost.

Many manufacturers make kits that make it easy to swap out a screw type plate with a lever plate on any ball head. For around $30, you can upgrade your ball head with a nice quick-release plate like the one pictured.

Above, the speed demon. A quick-release lever ball head plate.

How to upgrade your ball head in 3 steps

My Sunwayfoto XB-52 ball head has a #4 hex screw holding the original plate in. A 3/8″ drive ratchet with a #4 hex bit socket made it easier to remove the screw and the old plate. An Allen wrench would have made it more difficult to extract the screw. I’ve replaced a couple of plates so far, and these screws are often quite tight and difficult to loosen. Although the new plate came with a screw, I used the existing screw to mount the new plate.

Once the old plate is off, line up the notch under the new plate with the ridge on the top of the neck of the ball head. Screw it down nice and tight, and you’re done!

New quick-release lever lock Arca plate.

Pictured from left to right: original Arca plate, new Desmond DLR-60 quick-release lever lock Arca plate, Sunwayfoto X52 ball head with the new Desmond DLR-60 60mm quick-release lever lock Arca plate mounted on a Raubay Leveling Base, and a Benro carbon fiber tripod.

Lever Quick Release Benefits: Speed, Security, Simplicity

By replacing the screw with a quick-release lever, you gain a bunch of things.

Faster swaps = more creative flow.
Rock-solid security = no mid-shoot wobbles.
Stability: Screw types are prone to slippage vs. a clamp-grip fortress.

What’s your biggest tripod gripe? Vote below: Slow setup, shaky holds, or something else?

Upgrading isn’t just about gear; it’s reclaiming your creative edge. Tried a quick-release lever lock plate? Drop your wins (or woes) in the comments.

And if this saved your next shoot, share it with a fellow shooter who’s still fighting with the screw.

Beat Light Pollution with Didymium Filters: A Comparison – Silvana Della Camera Photography

Gear Review – Focus on Stars Filter – Silvana Della Camera Photography

Gadgetmania (Part 1) – Silvana Della Camera Photography

Gadgetmania (Part 2) – Silvana Della Camera Photography

To learn about upcoming workshops and tips on photography, consider subscribing to my website.

Taking photos and want to make them more compelling?

Art isn’t just for walls. Art is also to hold in one’s hands.

Want to explore New England through a camera lens?